Color selection of emulsion paint color matching s

2022-07-22
  • Detail

Nowadays, latex paint is used more and more widely. The latex paint on the market is rich in color and diverse in color. Some people like to modulate the color of latex paint, thinking that such color is richer and the decoration effect is better. Next, we will introduce the color selection and color matching skills of emulsion paint

nowadays, latex paint is used more and more widely. The latex paint on the market is rich in color and diverse in color. Some people like to modulate the color of latex paint, thinking that such color is richer and the decoration effect is better. Next, we will introduce the color selection and color matching skills of emulsion paint

color selection of emulsion paint

1. The top surface should generally use light color

light color gives people a feeling of light. If the ceiling and wall of the room are white and light color, the dado is white and light color, and the skirting line is dark, it will give people a feeling of light at the top and heavy at the bottom. On the contrary, deep at the top and light at the bottom will give people a sense of depression of top heavy at the bottom

2. Choose the color according to the direction of the room

for rooms facing south, the sunshine time is relatively long, and using cold colors makes people feel more comfortable; Due to the strong influence of the West setting sun, the room facing west can use deep cool color, which will be more comfortable; Because there is no sunlight in the room facing north, the choice is to prefer warm colors, and the chromaticity should be light

3. Choose color according to the shape of the room

color will change people's feeling about the shape of the room to a certain extent. For example, cool color can make the lower ceiling look higher. For the wall at the far end of the room, dark color can make the wall move forward. Similar effects can change the appearance of any room

latex paint color matching skills

1. Be careful in color matching. You can select samples, preliminarily match the number of colors, and then re configure and proofing according to the small samples. Now you can adjust the secondary color and secondary color respectively in a small container, and then add the main color. Slowly add the dark color with strong dyeing power intermittently, and constantly stir it to observe the change of color at any time

2. When matching colors, there are slight differences between the latex paint and the film after drying. The color of different latex paint will be lighter when it is wet, and the color will deepen when it is dry. Therefore, if the sample is a dry sample, the color matching paint needs to be dried before color measurement and comparison

3. When mixing multicolor emulsion paint, you can choose emulsion paint with the same properties to mix with each other, and the solvent system should also be miscible. Otherwise, due to the poor miscibility of emulsion paint, the quality will be affected, and even delamination, precipitation or gelation will occur, so it cannot be used

4. The transparent characteristics of the color paint film can be used to select the appropriate base color, which can make the color of the top coat more distinctive than that of the original paint. According to the principle of natural light reflection and absorption, a color produced by the superposition of the base color and the primary color is called “ Transparent &rdquo

editor's summary: This is the introduction of latex paint color selection and latex paint color matching skills. I hope it will be helpful to you. If you want to know more about it, you can pay attention to the information

苏州男科医院

杭州性病医院

重庆骨科医院

贵阳肝病医院

Copyright © 2011 JIN SHI